craigslist | tools in colorado springs

Heavy Duty Engine Hoist (Falcon) $50

2009-12-29T22:46:00-07:00

Heavy duty, well built engine hoist. 5-ton long ram. Smooth rolling solid steel wheels. Very heavy as it is made out of mostly 1/4" steel.

Works great. I just don't use it any more.

Only $50.00 firm, cash and carry.

Key words: cherry picker, engine lift.

MAC 3/8 impact set (Colorado Springs) $200

2009-12-29T22:45:07-07:00

Mac 3/8 impact gun. Comes with Mac Metric Impact deep well and regular size sockets. Inquire about socket pictures.

MAC Impact Gun (Colorado Springs) $150

2009-12-29T22:39:50-07:00

Mac tools 1/2 inch impact gun. I used this for about four months at work. I was hurt on the job and I have not used it since.

Taig Mini Mill, CNC (Colorado Springs) $1950

2009-12-29T22:14:47-07:00

Up for sale is a Taig CNC mini mill. I have not had time to learn how to use this yet so it is time for it to go. I have a lot more money tied up into this unit then I am asking but I need the cash for something else. Anyhow it comes with several bits and a turn table. If you have questions give me a call at 719-651-6484.

Electrician ladder (Colorado Springs ) $125

2009-12-29T21:49:33-07:00

24 foot tall.
Brand is RIGID
Has been used once

Contact Cindy 635-2992
OR
Bailey 2878886

Snap-on Wrench Set (Colorado Springs) $125

2009-12-29T21:46:04-07:00

Set, Wrench, Open End, 4-Way Angle Head. Well that is what snap on calls them.
I have the complete set original sells for about 600.00
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1"
I will even toss in a 1/2 blue point regular wrench.
You can get the same set on e-bay for 325.00

14" Speedi Cut SC7314 concrete saw (Dublin + Union) $250

2009-12-29T21:41:24-07:00

This is a running 14" conrete saw with blade that I recently acquired but no longer need. It could use a good cleaning. Call me at 930-7393 if interested.

Wood floor refinishing equipment (flintridge and vickers) $1200

2009-12-29T20:03:22-07:00

BONA-Dust Containment System Buffer/sander.
DCS Super Vac with extra bags.
Viking Edger with many sanding discs.
Also various hand tools and sanding discs and belts.

Make offer on all or seperate

Mitre Saw in picture not for sale.

call (719)393-5851

New OTC TMPS reset tool with 07 update and extras (Co. Springs) $250

2009-12-29T19:59:43-07:00

I have a new OTC 3833 Master set with 4.0 Software. It has never been used . It comes with everything you see in the picture except the certificate for the Nissan tool. Certificate has expired.

Brand New Craftman Air Compressor (Colorado Springs) $250

2009-12-29T19:57:23-07:00

*BRAND NEW* 150PSI, 2HP, 33Gal. 719-238-9923

10" table saw (TELLER COUNTY) $175

2009-12-29T19:54:44-07:00

1 1/2 hp motor 110 or 220 volt, "Delta saw, copy", Kings Saw co. runs good ,on moble stand. I upgraded too a 12" Grisilley $175 call lonnie 786 342 0374, or 719 748 3374 lake george colo.

Snap On Classic 96 Series Tool BOx (Colorado Springs) $5000

2009-12-29T19:28:02-07:00

Description:
� A bank of 50� extra wide drawers provide plenty of space to organize long extensions, prybars, or families of tools in the same drawer.
� Fiveof the drawers are double slided to hold 250 lbs of tools per drawer and is reinforced with four bottom stiffener.
� Aluminum drawer pull trim/rolled edges on drawers/deep drawer pulls.
� Monoprene vibration-reducing casters provide a whisper-quiet ride.
� Corner gussets are welded into each corner to keep the unit square for a lifetime of use.
� Heavy duty 14 gauge bottom panel with caster stiffener to support loads on rough floors.

Product Specifications
Stock # KRA2432PC
Name Roll Cab, Classic 96, 12 Drawers, Black

Brand Snap-on
Country Of Origin USA
Color Black
Cubic Inches (cm�) 33,116 (542,674)
Square Inches (cm�) 8,370 (53,999)
Load Capacity, lbs. (kg) 2,400 (1,088)
Net Weight, lbs. (kg) 547 (248.1)
Shipping Weight, lbs. (kg) 643 (291.7)
Caster Size, inches 6 x 2
No. of Drawers 12
No. of Shelves/Trays 0
Width, inches (mm) 73 13/32 (1,864.4)
Depth, inches (mm) 24 (609)
Height, inches (mm) 39 7/32 (1,008.4)

has stainless steel top and snap on cover in blue two snap on keys

will trade for bagged mini truck

GARAGE DOOR OPENERS $300

2009-12-29T18:50:01-07:00

Two electric Chamberlain-Lift master garage door openers one-half hp. Complete with door laser-eye sensors, code number keypad, two hand (car) remotes, open-close-lock pad, adjustable speed and torque. Approximately 4 years old. If interested call Jason at 719-499-6209, or email qntana@yahoo.com... thanks

Fireside PaperLog Roller (vickers and flintridge) $20

2009-12-29T18:47:52-07:00

never been used

Call (719)201-4357

22 TON AIR JACK (C/S) $150

2009-12-29T18:20:47-07:00

22 Ton air powered bottle jack. Has long handle and wheels for ease of use. call 719-499-5307 NO EMAILS PLEASE!

HEAVY DUTY TRANS JACK (C/S) $150

2009-12-29T18:18:30-07:00

Heavy duty transmission jack. 2000 lbs. capacity. call 719-499-5307 NO EMAILS PLEASE!

20 TON PRESS (C/S) $150

2009-12-29T18:13:32-07:00

20 Ton shop press $150 CALL 719-499-5307 NO EMAILS PLEASE!

HEAVY DUTY AIR COMPRESSOR (C/S WEST) $650

2009-12-29T18:06:07-07:00

80 Gallon I/R Type 30 air compressor. Single phase 240 volt. 7hp electric motor. max pressure up to 200 psi. Can use 1/4" or 1/2" lines at the same time. CALL 719-499-5307 NO EMAILS PLEASE!

Welding lead (Colo Spgs) $300

2009-12-29T17:57:15-07:00

Stinger and Ground W/ aprox. 300+ ft. of lead All in very good condition

Call 719 391-2267

Porter Cable PTA5 Pneumatic Air Chisel Set - NEW (Colorado Springs) $15

2009-12-29T17:55:44-07:00

The PTA5 set includes includes: Flat chisel, Rivet and bolt cutter, Tapered punch, Muffler cutter chisel and Tail pipe cutter.

These replacement chisels fit .401 air hammers (the common size).

Find them elsewhere for $23 to $28.

Ryobi BT3000 Tablesaw with stand (Colorado Springs) $100

2009-12-29T17:38:54-07:00

Selling a Ryobi BT3000 Saw with stand. Great Condition, used only a few times.

Classic Yazoo Master Mower (Westside - 21st St.) $75

2009-12-29T17:30:27-07:00

A classic Yazoo Master mower and weed cutter. Self-propelled, cuts a 24" wide swath, manual start, Briggs & Stratton 5 HP engine, 20" nobby bicycle tires on the rear, 6" hard rubber tires on the front. Excellent for cutting tall grass and weeds which "may have gotten away from you". Buy now to be ready for the Spring and Summer 2010. $75. Call John 719-337-3705.

Mac Tool Cart (Dublin and Powers) $150

2009-12-29T17:28:59-07:00

This is a black mac tool cart with one locking drawer and a locking lid, with two keys. It is in good shape! Asking $150.00 obo thanks Jeff (719) 231-1125

Black Weather Guard Tool Box (Colorado Springs) $400

2009-12-29T17:27:20-07:00

This tool box is for a mid size truck. I had it on my Tacoma. It is in really good shape and the same box brand new goes for $600.00. I�m asking $400.00. If you're interested call me at 719-271-0779.

Great Neck Professional Heavy Duty Bench Vise - NEW - $60 OBO (Colorado Springs)

2009-12-29T17:16:10-07:00

Great Neck HDV4 Professional Heavy Duty Bench Vise for $60 OBO (or best offer).

This is brand new and still in the unopened, stapled box. I've been moving this around with me, but it needs a good home and garage.

From the Manufacturer
------------------------------
Professional Heavy Duty Bench Vise, has a jaw width of 4 inches, a jaw opening of 5 inches and a pipe capacity of 1/8 to 2-1/2 inches and a round lathe-turned slide bar. Vise is highly enameled, with polished replaceable steel jaws and permanent pipe jaws and polished anvil. Pre-drilled holes in the full 360-degree swivel base alloy the vise to be permanently mounted to the bench. Lifetime warranty.
------------------------------

Amazon.com is selling this same vise for $74.99 plus $25 shipping.
http://www.amazon.com/Great-Neck-HDV4-Professional-Heavy/dp/B00004Z2RX/ref=sr_1_1?ie=UTF8&s=hi&qid=1262110611&sr=1-1

I'm asking $60 OBO for the vise and you save the shipping as well! 210-5598.

Milwaukee Sawsall (Down South) $50

2009-12-29T16:36:53-07:00

works great! 12amp

STIHL CHAINSAW (S. COS) $70

2009-12-29T16:35:51-07:00

Of course it runs...its a Stihl....might need a new plug....probably not....I think I changed it recently...got a new saw for Christmas and want to sell this one....this one has quick change and quick chain tighten....they are about $250 new...so I am firm at $70.....719-573-7753

drill $15

2009-12-29T16:08:26-07:00

craftsman hand drill

Worklight (dwntn.) $15

2009-12-29T16:05:34-07:00

Comm. electric worklight w/ 2 150Watt halogen bulbs. 2 switches w/ 7 ft. cord and swivel base. Call 719-210-7895

Tool Totes (dwntwn.) $10

2009-12-29T16:04:12-07:00

2 husky totes.Pretty much new. lightly used. $10 for both.call 719-210-7895

Compressor (Powers & Carefree) $15

2009-12-29T16:03:04-07:00

Compressor

please contact Kevin @ 719-964-2831

Click Image for Larger View

Tankless Compressor

Works Great
Up to 45 Lbs pressure
$15 Cash obo

Craftsman tool/tackle box (dwntwn.) $10

2009-12-29T16:02:01-07:00

Nice flip top box. in very good condition.$10 call 719-210-7895

Harbil Paint Colorant Dispenser (Woodland Park) $695

2009-12-29T14:44:06-07:00

HARBIL PAINT COLORANT DISPENSER - used - Model#12NSC80232 with Siemens Nixdorf PCD-3BSX computer and keyboard, 13" Samsung color monitor, SP428PS, Citizen printer IDP3530 will all cords, cables and cabinet. $695.00 OBO. Buyer responsible for shipping & costs. Seller will assist. Call Steve at 719 687-8316.

Shop-Vac 10 Gallon Wet/Dry 1.5 HP - Model 800C - Excellent Condition (Claremont Ranch) $25

2009-12-29T14:15:44-07:00

This Shop Vac is in very good condition. Only used to vacuum interiors. No heavy shop use.

10 Gallon, High Performance, Wet/Dry, 1.5 HP, Model 800C

Comes with the hose, but does not come with attachments or extra filter.

Asking $25 Or Best Offer

Call or text (970) 310-5451
It's a long distance area code, but I live here in the Springs.
Or email me using the link above.

Thanks!

shop vac shopvac shop-vac

Toro 1800 snow thrower (near OTC- Union & Uintah area) $225

2009-12-29T14:07:35-07:00

Barely used electric snow thrower. Works great but we just don't use it. $225obo. Call 632-2656 or email the link. Thanks for looking!

Click here for more info about it: http://www.amazon.com/Toro-18-Inch-Electric-Thrower-38025/dp/B00005OQMG/ref=sr_1_1?ie=UTF8&s=hi&qid=1262119841&sr=8-1
Technical Details
Electric curve snow thrower; simple trigger start and no parts to lubricate
12 amp electric motor throws snow to 30 feet, cuts 10-inches deep and 18-inches wide per pass
Durable plastic body; metal handle; minor assembly required
Includes 160-degree adjustable chute, safety key lock
47- by 18- by 36.2-inches; 24 pounds; model # 38025

rolling work bench (Ellicott) $20

2009-12-29T13:40:29-07:00

It is about 30" wide by 5' long. The top is made with 3 2x10s side to side. It has a bottom shelf for storage with 4x4s and plywood holding it up. Lag bolts holding it together. I think the builder was going to use this thing as a tornado shelter..;) It is on rolling casters, so it moves easy. very sturdy workbench. I can help load or deliver for extra fee. I cant get pics to load on CL so email and will send some. No scams, No shipping, Cash only. Contact Denp6473 at yahoo.com

Gerber hand tool (palmer park/powers)

2009-12-29T13:39:24-07:00

Gerber hand tool with case is still in great condition
asking $40.00
email drdna5@comcast.net or call 719-597-5040

Curtis air compressor (Colorado Springs) $1000

2009-12-29T13:33:37-07:00

51/2 horse power, 80 gallon tank. maybe one hundred hours run time. works perfect.

my # 719-651-8417

acet. tank full (cos) $75

2009-12-29T13:31:01-07:00

I have a full acet tank . It's about 3 ft tall. I bought a gas welding set up and the hose/reg set up I have is to large to fit the tank. It must take a smaller regulator set up. I have no use so it's a great deal first $50 gets it. Email please.

Drum Sander Powermatic 16-32 (Broadmoor) $750

2009-12-29T12:12:02-07:00

Powermatic 16-32 Drum Sander, 1.5 horsepower, variable speed tractor drive, visible tear in belt drive is only flaw on machine, manual and extra sandpaper belts included. Because of open end, it will sand up to 32" wide boards with 16" wide arm.
Works great, but does require dust collection!
Tom
896-0574

Victor cutting torch & regulators (Green Mtn. Falls) $125

2009-12-29T12:11:55-07:00

Cutting torch & regulators with cart and miscellaneous tools. New hoses.

IPEX 3/4" XPA Crimper - NIB (Colorado Springs) $60

2009-12-29T12:04:40-07:00

PEX 3/4"

Pressure Crimping Tool

Call Kevin @ 719-964-2831

See still images below!

Made in USA

Part Number: 88557

For use with copper crimp rings

You are buying on one I-PEX XPA 3/4� circle Pressure Pipe Crimping Tool.

This item is NEW in the box.

Features/Includes:

Measures approximately 18� in length.
Professional grade hand tool.
Blue extended grip.
A Go � No Go tool for checking fitting compression.
Adjusting / Calibrating allen wrench.

The quality of this product meets or exceeds comparable products manufactured by Rigid, Viega, House Pex, Zurn, and Wheeler Rex.

This is A GREAT Deal!!

Thanks for Looking & please email me with any questions.

Payment Instructions

Buyer to Pay All Shipping and Handling Fees

The following forms of payment are accepted:

Cash
Pay Pal

SPEEDAIRE AIR COMPRESSOR (COLO SPGS) $60

2009-12-29T11:36:24-07:00

SPEEDAIRE AIR COMPRESSOR OLDER MODEL GOOD FOR SMALLER JOBS $60 7192175801 RICK

Digital Battery Analyzer (Widefield) $5

2009-12-29T11:33:57-07:00

This is a digital battery analyzer made by Midtronics. It is a power sensor 400. If interested please call Dwain at 719-238-4369. This posting will be deleted when gone.

Carpenter Tool Belts (Widefield) $8

2009-12-29T11:25:33-07:00

Top tool belt is made by Work Wear, McGuire-Nicholas DM-498-GS. $8.00. The other three are brand new and made by Atchison leather products. $4.00 each. For $18.00 you can have all 4. If interested please call Dwain at 719-238-4369. This posting will be deleted when gone.

Lug Wrenches (Widefield) $3

2009-12-29T11:17:19-07:00

Metric lug wrench has lug sizes of 23, 21, 19, and 17mm. $1.00. Standard lug wrench has lug sizes of 15/16, 3/4, and 5/8 inch. $3.00. If interested please call Dwain at 719-238-4369. This posting will be deleted when gone.

Ratchet and screw driver set (Widefield ) $8

2009-12-29T11:07:46-07:00

I have a new 20 piece midget ratchet set made by Chapman. $8.00. I also have a 27 piece screwdriver and bit set. $5.00. If interested please call Dwain at 719-238-4369. This posting will be deleted when gone.

New Impact set (Widefield) $20

2009-12-29T10:54:02-07:00

This is a brand new never used 12 piece 1/2 inch drive impact set with case made by Allen. It includes sockets from 9/16 to 1 1/16, two extensions and a wobler. If interested please call Dwain at 719-238-4369. This posting will be deleted when gone.

Delta Table Saw, & More (West Side)

2009-12-29T10:53:49-07:00

Delta 12" Contractor Table Saw, 220v, 54" Bar $300 - Reduced for quick sale! 45g Med & Larger RV watertank, Misc woodworking tools

719-473-3511 of 661-2937

30" Yard Man Snow Blower (Monument, CO) $600

2009-12-29T10:47:48-07:00

30" Yard Man snow blower - 2 stage dual impeller - elevation and directional throw controls on main console. 6 forward speeds - 1 reverse speed. Light.

Used but in good condition. Electric start!

I will post more pictures soon.

Contractors Caulking Gun (Widefield) $3

2009-12-29T10:46:09-07:00

Contractor caulking gun has only been used one time. If interested please call Dwain at 719-238-4369. This posting will be deleted when gone.

Husky Air Compressor-32 Gallon (Gleneagle) $240

2009-12-29T10:38:46-07:00

32 Gallon Husky Air Compressor

1.7 Running HP

150 Max PSI

Excellent Condition

Hi lift jack (Woodland Park) $50

2009-12-29T09:48:07-07:00

New, never used hi lift jack. $50.00 obo

Floor sander,router (Florissant)

2009-12-29T08:20:49-07:00

strait line 120 volt 8 in drum floor sander$600 brand new black and decker router $40 all tools in working order all prices firm. Call 719-748-5623

Nail guns and compressor (Florissant)

2009-12-29T08:17:57-07:00

framing Hitachi nail gun $90 framing max air nail gun $65 emglo wheel barrow compressor $125 all prices firm all in working order contact us at 719-748-5623

saws (Floressant)

2009-12-29T08:17:26-07:00

gray handle skill worm drive saw $65 red handle skill worm drive mag77 $85 yellow 18 volt dawalt battery not included $40 prices firm all in working order. call 719-748-5623

all kinds of tools (Floressant)

2009-12-29T08:16:58-07:00

Max air coil siding gun $100 Hillty ramset $150 Dawalt plainer needs new blade $40 new rolair compressor we payed $750 we will sell for $300 all tools in working order and all prices firm, Call 719-748-5623

*Awesome 5 piece Dewalt Set and matching Dewalt Bag (Colorado Springs) $500

2009-12-29T08:11:58-07:00

Awesome brand new 5 piece Dewalt Set. Used the drill and light a couple of times. The other tools never used. Comes with a XRP drill, a Grinder, a Skill Saw, a Sawsaw, and a Flood Light. All tools are XRP 18 volt plus the set comes with a matching Dewalt Bag. This was an 800 set but I'm selling it for 500 obo. Cash only. If interested call 719-388-3970 anytime for more info. No hanky-panky. Please cash only. You can come and test the set out. 500 obo.

I fix Ridged Chargers and Batteries (CS) $25

2009-12-29T00:25:36-07:00

Email me with your needs and i give you a quote..

roofing gus (colorado springs) $100

2009-12-28T22:07:58-07:00

I HAVE 3 PORTER CABLE 2 BOSTITCH ROOFING GUS I AM ASKING 100 DOLLARS FOR ECH GUN OR 400 FOR ALL THEM OR MAK ME IN OFERR.

key maiking machine (colorado springs) $185

2009-12-28T22:02:00-07:00

I have this key machine that works good for any body that wans tocut keys ot stores or parking lots or flea marqet this machine coms whit key holder that gos in top of the machine you can put obut 600 keys on the rack.

P3500 Strip Fed Ramset (C/S)

2009-12-28T21:59:09-07:00

Used but works flawlessly, you can shoot a few rounds when you come see it to test that statement. $100 Firm, I will not negotiate on this price.

Calls Only - Isaac @ 719-330-7880

Cylinder Dolly and Large Hand Truck Dolly (C/S)

2009-12-28T21:57:05-07:00

The Green Cylinder Dolly is in new condition, and it a Anthony Dolly Model # 54-FRA Retails for $390 - Reduced to ONLY $85

The yellow dolly is also in new condition, has a large platform base, and selling for only $45

NO EMAILS Call Isaac @ 719-330-7880

Snap-On torque wrench (No. central) $100

2009-12-28T21:19:47-07:00

1/2" Drive, dial indicator, flex head, good shape, make offer.

Prowatt 800 DC to AC Inverter 12 Volt (Colorado Springs)

2009-12-28T20:55:15-07:00

***Please put Prowatt in emails, so I know you're not a spammer. Thanks!******

Prowatt with Output of 115 VAC, 60 Hz, 800W 100Amp, silent. Moving, reduced to $75.

Portable Sandblaster & Air filter (Colorado Springs) $125

2009-12-28T20:27:02-07:00

This a 100lb hopper and air filter canister for the helmet. Works great, has an eight foot hose and a couple of different size nozzles. Contact me with any questions.

Air Compressor (Colorado Springs) $75

2009-12-28T20:23:36-07:00

This is a husky air compressor that is one year old. Contact me with any questions.

25 gallon Craftsman Air Compressor (Woodland Park) $100

2009-12-28T19:42:33-07:00

25 gallon Craftsman Air Compressor- has some hoses

1 71/4 circular saws (80918) $20

2009-12-28T19:42:30-07:00

Ryobi 71/4 circular saw 120v 14 A
works great, good condition
$20 obo

Skilsaw 71/4 circular saw 120 v 12A
Works great, great condition
$20 obo

Shop Vac - 10 gallon (Woodland Park) $10

2009-12-28T19:39:40-07:00

10 gallon wet/dry Shop Vac - has hose

Sears 12v Boat/ATV Winch (80918) $75

2009-12-28T19:38:04-07:00

12v Sears 4940 Winch
3000lbs

Sorry not to much more info. it does work, ive tested it. I assume you could use this for many applications.
ATV Winch
Boat Trailer Winch
Garage winch.

If you need any more pics or info, I can try to find some on the web.

Craftsman 22" Snow Blower/Thrower (Woodland Park) $350

2009-12-28T18:51:48-07:00

22-Inch Craftsman electric Start Snow Thrower only used 3 times. Excellent, like new condition, only $350. Please email or call 687-0854 for more information.

JET Jackstands (C/S) $40

2009-12-28T18:36:14-07:00

Pair of JET Jackstands, brand new, still in the box. 6 Ton weight capacity.

air compressor (westside) $225

2009-12-28T18:30:07-07:00

coleman powermate 6hp 27gallon stand-up used less than 40hrs.like brand new call 719-313-9308

BUCK BROTHERS 16"/10Pt. HARD EDGE HANDSAW (Colorado Springs) $12

2009-12-28T18:22:45-07:00

Buck Brothers Hard Edge Handsaw 10 Pt./16". Excellent condition. $12. Cash only. Please serious inquiries only. Thank you.

Ideal Ratchet Telemaster (Colorado Springs) $35

2009-12-28T17:23:53-07:00

NEW IDEAL RACHET TELEMASTER

Klein Essential Six (Colorado Springs) $50

2009-12-28T17:23:34-07:00

NEW 6 PIECE APPRENTICE TOOL SET

Poulan Chain saw (Colorado Springs) $70

2009-12-28T17:20:37-07:00

Poulan Chain Saw

Green Poulan Chain Saw 2300. 16" bar.

$70

Sprayer head and tips (for sealcoating tank)- $18 (CO Springs)

2009-12-28T17:15:02-07:00

719-440-5586

Sprayer head with tips-
Had been used with Sealcoating machine-
Now $18 for all-
Thrown in: tips for upright propane tank

14.4v Craftsman Rechargeable Drill (Briargate) $20

2009-12-28T16:50:50-07:00

Drill does not run as it needs a new motor. This can be done at Sears but I just haven't had the time. Also comes with carrying case, two batteries and charger. Price is worth the batteries and charger.

welding cart oxy acetylene dolly (ab acad) $40

2009-12-28T16:44:22-07:00

this is super heavyduty welding cart. will hold full size oxygen and acetylene tanks.

if interested please call 3577883

victor oxy acetylene torch, hose, regulators (ab. acad) $100

2009-12-28T16:39:23-07:00

This torch comes with a Victor model CA-150 cutting torch with a number 0-3-101 cutting torch tip, a model number WH-260C mixing handle. The torch and mixing handle together measures 16 inches in length. The hose is about 15 feet and has both oxygen and acetylene regulators all in good shape.

If you are interested call 719 357 7883.

hitachi nail guns and stapelers for framing (80915) $130

2009-12-28T16:33:08-07:00

have nail guns for framing good conditions works excelent HITACHI
asking $130 OBO

staplelers good condition works excelent HITACHI $130 OBO

Black and Decker workmate 400 (briargate) $30

2009-12-28T16:26:09-07:00

this is a nice workbench it folds flat for easy storage, supports up to 500 lbs. used in good condition.

Craftsman Toolbox Casters (CW Colorado Springs) $20

2009-12-28T16:09:13-07:00

Four casters from a Craftsman toolbox, purchased yesterday. I needed 4 swivel casters. Couldn't find exact height match for the two 4 1/4" diameter swivel casters that came with, so replaced all 4. These are the 4 that came with the toolbox from Sears, 2 locking swivel and 2 fixed direction.

Husky Tool Boxes (cos) $350

2009-12-28T16:07:46-07:00

Husky rolling tool box 2-piece. Has several drawers and locks. $350 for the pair....won't sell individually. It is a really nice set and is in excellent condition. You can also call me at 719.205.7168

Job Box (Colorado Springs, CO) $700

2009-12-28T15:56:23-07:00

KNAACK Model 89 Storage Master Chest
H: 46 W: 30 L: 60
Weight (lbs): 337
Cubic ft: 47.8
This job box is in great condition, has two shelves, a piano lid, and is on heavy duty 6 inch casters for easy transport. I am changing my career and no longer need this tough gang box. $700.00 Please call if you are interested or have any questions 970-203-4928 or 719-482-8048

Ladder, 16' Extention (Colorado Springs, CO) $70

2009-12-28T15:55:26-07:00

WERNER
Aluminum 16� Extension Ladder
Each section is 8� long
200 lb. weight rating
This is a perfect painter�s ladder and is in great condition. I am changing careers and no longer have use for it. $70.00 Please call 970-203-4928 or 719-482-8048 if you are interested or have any questions.

Level, 6ft (Colorado Springs, CO) $45

2009-12-28T15:54:18-07:00

JOHNSON 72 in. Aluminum Box Beam Level
This level is in great condition and has hardly been used. I am changing careers and no longer have a need for this quality level. $45.00 Please call 970-203-4928 or 719-482-8048 if you are interested or have any questions.

Table Saw, 10 inch (Colorado Springs, CO) $375

2009-12-28T15:53:02-07:00

Dewalt 10 inch Table Saw
Portable
15amp Motor
Large Table
Rack and Pinion Fence
This table saw is powerful and accurate. Hardly used it is in excellent condition. $375.00 OBO Please call 970-203-4928 or 719-482-8048

Dewalt Bench Grinder (Colo Spgs) $110

2009-12-28T13:49:59-07:00

Brand New still in box. Dewalt Bench Grinder. Sells on ebay for 149.00 without shipping. Recieved as a gift and I will never use it. Email me with any questions. Thanks

forklift crown ws 2000 $1900

2009-12-28T13:36:55-07:00

very good condition this lift is a 2 stage and will reach 10.5 ' it has the 42" forks and has near new outrigger wheels and contactors. the original batt. has a few bad removable cells and comes with the lift. it is currently running on 2 deep cycle marine batts and runs for about 5-6 hours per charge. unit is rated for 4000# but can actually lift 5000# nice running lift. will consider trading for a nice trailer or e350 van. thanks for looking

call richard at: 719-649-5243

Ladders (Colorado Springs) $30

2009-12-28T13:26:08-07:00

6ft Type I Industrial $30
8ft Type I Heavy Industrial $50
20ft extension TypeII Commercial $80

Craftsman Table Saw (Downtown Colorado Springs) $95

2009-12-28T13:16:36-07:00

Sears Craftsman table saw in excellent condition. Comes complete with fence, guide and safety guard. Model 113298051. Phone 719 359 6072.

Assorted Metric & Standard sockets $3

2009-12-28T12:36:19-07:00

Assorted metric and standard sockets. Various sizes and brands from Snap-on to Craftsman to Japan made. Prices start at around $3.00 and up. We also have sets. Anything you can think of we probably have it. Call or stop by 719 636 2467, Kash's Inc, Address 2346 E Platte Ave, Colorado Springs, CO 80909, We can ship to, We are open Monday-Saturday 9am-5pm. We Buy Sell Trade Pawn anything of Value! Colorado Springs favorite Pawn Shop. Visit our friendly Staff for any help

Automatic Oiler/Water Seperator (Calhan/Yoder) $20

2009-12-28T12:27:14-07:00

For Sale 1 Speedaire model 4ZL78 Automatic Oiler for pneumatic tools also seperates water from outgoing air. Sells for $58.60 new through Grainger (www.grainger.com) Asking $20. Call or E-mail if interested (719) 243-1536 I work in the Springs and can bring in if someone is interested. Thank you

Heavy Duty Pipe Cutters (Widefield) $15

2009-12-28T12:21:26-07:00

I have two heavy duty pipe cutters that are brand new and have never been used. They are 1/8 to 2 inch diameter. I am asking $15.00 for each. If interested please call Dwain at 719-238-4369. this posting will be deleted when gone.

Craftsman Snow Thrower/Blower (Coloardo Springs/Monument) $350

2009-12-28T12:20:19-07:00

2005 Craftsman Snow Electic Start Thrower/Blower. Excellent/Clean condition 7.5hp 24" Electric Start 179cc 24" path - sells new for $600 - yours for only $350.00. Cash only please - local pickup.

Jet Dust Collector (Colorado Springs) $300

2009-12-28T12:17:22-07:00

Jet Dust Collector in excellent, like-new condition.

Please email me at the above address for more information and to schedule a time to come see.

DEWALT 18V SAWS WITH CHARGERS $175

2009-12-28T12:17:10-07:00

I AM SELLING MY DC385 RECIPROCATING AND A DC390 CIRCULAR DEWALT 18V SAWS. BOTH HAVE BATTERIES AND A SINGLE CHARGER. THEY ARE BOTH IN EXCELLANT CONDITION AND THE CIRC SAW HAS THE ORIGINAL BLADE ON IT. CALL WITH QUESTIONS 636-3710 THESE ARE PRICED TO SELL QUICKLY